Low Price Dredger with Cummins Engine
1.Introduction
The Cutter Suction Dredger of steel construction, the non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area "A" or below the "A"-line specified in code for inland river steel engineering ship manufacture of P. R. China.
The dredger can be used to excavate and transport cohesive sediment below the class III specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P. R. China.
The hull consists of three pontoons, one main pontoon (engine room), two side pontoons. All parts are dimensioned to allow the YS-CSD450 dredger to be transported by road, rail or water. The dredger is equipped with a rapid connection-disconnection system for the pontoons, achieved using bolts at deck level, hull front and rear , and hooks at the bottom. Further salient features of the dredger are the dredger is powered by a Marine engine. the main engine is to drive the dredge pump and hydraulic pump. Hydraulic pump will in turn power other all equipments such as cutter, swing and ladder winches, and the spud rams etc.
The hull is of all welded, steel construction to give the dredger the necessary strength required for dredging operations. The side pontoons are connected to the main pontoon by means of bolts.
The hull steel plate used is CCSB (shipbuilding steel plate ) .
2.Features:
1. One-man operation. The most advanced PLC control system.
2. New highly effective cutter/wheel drive system
3. Reliable hydraulic system.
4. Fresh water cooling system
5. Completely assembled and fully tested before delivery
6. Very simple and fast assembly, afloat of onshore
7.Standard design, allowing short delivery times
8. Standard spare parts available from stock
9. Designed as standard to qualify for Coastal Waters Certificate
10. Optional equipment available
About YS Dredger:
*A wide range of use applications
*High efficiency, low fuel consumption
*Full hydraulic control with Rexroth, Vickers
*Siemens PLC operation with the operation convenience
*Engine choice from Weichai, Cummins, Caterp,Yuchai,Jichai and more.
*Can choose reliable Chinese brand parts to lower costs
*The modular design enables fast assembly with YS seniors engineers
*Logistic barge components available in factories to allow short delivery times
*Control the working process,materials lower cost;
*Follow manufacture guideline: CCS-ZC standard
*It can pass DNV,CE, BV,CBS, and more certificates.
*Western brand parts, easy to find globally
*Gain access to our sales team, design team, manufacture team
*Lifetime Technical Assistance
*Optional equipment is available
*Please leave a message to Director of Global Sales Hailey Zhou for more information
3.Parameter
| Items |
Specs |
Remarks |
| Total Length |
44m |
|
| Body Length |
35.0m |
|
| Hull depth |
2.2m |
|
| Hull width |
8.0m |
|
| Main Power |
1200KW
Brand 1)Jichai Disel Model,12V190
or Brand 2)Cummins Engine |
Pump Power |
| |
300KW Disel Model. For hydrulic system |
|
| Pump model |
WN450 |
Shijiazhuang |
| Pump Suction Dia |
550mm |
|
| Discharge Dia |
450mm |
|
| Water flow |
4000m³/h |
|
| Dredging depth |
15meter |
|
| Discharge Distance |
1500m |
|
| Work' body weight |
260T |
|
| Spuds |
630mm Two sets |
20 metres long |
| Winches |
3 Sets hydraulic winch |
|
| auto-navigation |
no |
|
| Operation System |
PLC control system |
|
| Accessaries |
Tools for diseloil sealwelders ect. |
|
4. FAQ
1.YONG SHENG CERTIFICATE
We can provide CE,SONCAP,BV,ZC certificates to our clients
2.YONG SHENG DREDGER SYSTEM
Full hydraulic system, can be operated by a single person.
3.YONG SHENG DREDGER WORKING PROCEDURE
Hydraulic dredgers use PLC system and hydraulic system to controll the operation process, dredge and transport materials. The material is picked up by the suction of a pump, then transported through a pipeline in the form of a slurry.
4. YONG SHENG 1 YEAR WARANTY
Our shipyard provides aftersales support service and 1year warranty.
5. 1 YEAR FREE SPARES
Accessory Warranty - All equipment Accessories are covered for 1 year.
6. Available STOCK
Available cutter suction dredger can be shipped at any time
7. ENGINEER ARRIVE AT WORKING SITE WITHIN IN 3 DAYS
In case of any problems or technical malfunction which can affect normal operating process , our specialists can arrive to fix them in three days after client's request
8. TRANSPORT IN BULK OR IN CONTAINER
Every cutter suction dredger is dismountable. Can be transported in bulk or in container
9. INSTALL TIME 10-20 DAYS
After dredging equipment arrived we will send 2-3 engineers to help install the dredger. installation can take 10~20 days.
10. ENGINEER HELP TO TRAIN SITE CAPTAIN
Our qualified team will train client how to operate dredger cutter suction .
5.Concerned Question:
Q3, What are the delivery terms?
A: YS Dredger delivery can be in containers or in bulk depends on the dredger size. YS has in-stock dredgers, and constantly storing dredger parts, pipes, pontoons, to shorten the delivery period for special needs.
Q4, What about the payment terms?
A: Payment can be paid in T/T or L/C, payment terms and financial support can be discussed.
Q5, What are the warranty terms?
A: HID provides a standard 1-year warranty, free problem solving with lifetime technical assistance
Q6, Why you say YS is your trustworthy dredger manufacturer?
A: YS is a trustworthy dredger manufacturer because we have 30 years' manufacturer workmanship, manufactured for many Fortune 500 companies globally. YS continuing to innovate and develop new products such as amphibious dredger, salt mining dredger and more, upgrades existing dredger technology. Our engineers and designers are hired from prestigious dredger institutions in China. Our products are working in more than 40 countries so far and have 6 global offices to better serve our clients.
6.YS Global Cusometers factory visiting
7.YS Dredger After Sales Services:
- Free dredger consultation and free product drawings
- Customize dredgers based on the client's actual dredging needs
- On-site visits and factory visit services provided by YS
- Arrange 2-3 YS senior engineer and technicians to enter the working site within 36 hours
- Free professional assembly, training and operating to make sure dredger operates smoothly
- 1-year warranty and Lifetime technical assistance
- Sign after-sales service agreement with YS clients
- Offer spare parts at a discounted price
- On-site parts available
- YS company requires the responsible Sales team, design team, manufacture team available fast and best serve clients.
YS Discharge Pipelines
Why Choose YS Dredgers:
- 30 years' dredger manufacture workmanship
- Fortune 500 Company chosen supplier
- Large production, ISO 9001 quality system
- 6 manufacture shops, R&D center, testing pool
- Presences in 37 countries
- 10 series of dredging equipment
YS Other Equipment:
Welcome to YS Shipyard, we are looking forward to providing free consultation for your dredging projects, customize the dredge just for you, manufacture, delivery, assembly, train, operate, and provide lifetime technical assistance to achieve your dredging goal!
){kind=link}
){kind=link}